Cruise Control (If Equipped) - Suzuki SX4 2016 Owner's Manual

OPERATING YOUR VEHICLE

Cruise Control (if equipped)

The cruise control system allows you to
maintain a steady speed without keeping
your foot on the accelerator pedal. The
controls for operating the cruise control
system are on the steering wheel.
You can use the cruise control system with
the following conditions:
• For manual transaxle vehicle, the gear
position is in 3rd, 4th, 5th or 6th (if
equipped).
• For automatic transaxle or TCSS vehi-
cle, the select lever is in "D" position, or
the gear position is in 3rd, 4th, 5th or 6th
in the manual mode.
• The vehicle speed is about 40 km/h (25
mph) or higher.
WARNING
To help avoid loss of vehicle control,
do not use the cruise control system
when driving in heavy traffic, on slip-
pery or winding roads, or on steep
downgrades.
3-57
(1)
(3)
(2)
(4)
61MS417
(1) "CRUISE" switch
(2) "CANCEL" switch
(3) "RES +" switch
(4) "SET –" switch
To Set Cruising Speed
1) Turn on the cruise control system by
pushing the "CRUISE" switch (1). When
the cruise indicator (5) comes on, you
can set cruising speed.
2) Accelerate or decelerate to the desired
speed.
3) Push the "SET –" switch (4) and turn on
the set indicator (6). Take your foot off
the accelerator pedal and the set speed
will be maintained.
WARNING
If the cruising speed is set by acci-
dent, you cannot decelerate or could
loose control of the vehicle. This
could lead to an accident, resulting in
severe injury or death.
Turn off the cruise control system
and make sure the cruise indicator
(5) is off when the system is not in
use.
Information display
EXAMPLE
(5) (6)
(5) Cruise indicator
(6) Set indicator
83RM0-01E
61MS418