Suzuki VITARA Series Manual page 65

BEFORE DRIVING
Latching
To latch the connector:
1) Pull the belt out from the holder.
2) Insert the connector latch plate (2) into
the connector (3) to align the triangle
marks until you hear a click.
WARNING
Check that the detachable connector
is securely latched and the webbing
is not twisted.
2-39
Stowing rear center lap-shoulder belt
Stow the belt after it is retracted com-
pletely.
(2)
(3)
61MM0A064
To stow the belt, insert the latch plate into
the slit (1). Then insert the connector latch
plate (2) into the roof holder slot (3).
NOTE:
For Australia: For additional information,
refer to the "SUPPLEMENT" section at the
end of this book.
(3)
(1)
(2)
61MM0A065