Suzuki VITARA Series Manual page 283

OPERATING YOUR VEHICLE
NOTE:
• The previous ON or OFF setting of the
lane departure prevention is saved even
if the engine switch is pressed to turn the
ignition mode to LOCK (OFF).
• Under the following situations, initial
learning of the system has not been
completed, so it may take time to oper-
ate even if the lane departure prevention
is set to ON (standby state).
– When your vehicle mileage is short
such as immediately after purchasing
– When your vehicle is immediately after
checking and servicing
• If your vehicle is towed with the engine
or the strong hybrid system on, press the
lane departure prevention
switch and turn off the Lane departure
prevention.
3-85
Information display
The following chart shows the state of the
lane departure prevention function.
Indication
ON/OFF
#1: Depending on the monocular camera-
Color State #2: If the lane departure prevention func-
White Standby
or
Ready
#3: At the same time, the lane departure
Amber Active (#3)
or
Failure (#3)
Standby:
White Standby
Standby (temporal suspension) state of the
outlines
lane departure prevention function due to
(inside
insufficient operating conditions
black)
Ready:
White Ready
Ready (to detect deviation from the lane)
lines
state of the lane departure prevention
(#1)
function with necessary operating condi-
tions
White Active
Active:
lines
Active state of the lane departure preven-
(Blink)
tion function detecting a deviation from the
(#1, #2)
lane and assisting the steering
recognition, unrecognized one lane
line could be shown by a white outline
(inside black).
tion detects a deviation from the lane,
the departure side white lane line indi-
cation blinks.
prevention warning light on the instru-
ment cluster also comes on.