Suzuki VITARA Series Manual page 305

OPERATING YOUR VEHICLE
Information display
EXAMPLE
(9) (7)
(10)
(6)
(6) Following distance indicator
(7) Adaptive cruise control indicator
(8) "SET" indicator
(9) Vehicle ahead detecting indicator
(10) Set speed indication
1) Turn on the adaptive cruise control by
pushing "CRUISE" switch (2). When the
adaptive cruise control indicator (7), fol-
lowing distance indicator (6) and vehi-
cle ahead detecting indicator (9) appear
on the information display, you can set
adaptive cruise control.
2) Accelerate or decelerate to the desired
speed.
3-107
3) Push "SET –" switch (5), "SET" indica-
tor (8) and set speed indication (10)
appear on the information display.
If take your foot off the accelerator
(8)
pedal and the set speed will be main-
tained. At this time, vehicle ahead
detecting indicator (9) will vary as fol-
lows, depending on the presence or
absence of the vehicle ahead.
A vehicle ahead is not detected. In this
53SB3049
case, your vehicle is in the state of con-
stant-speed control.
A vehicle ahead is detected. In this
case, your vehicle is in the state of
deceleration control and following con-
trol.
WARNING
If the adaptive cruise control is acci-
dentally set, you could lose control of
the vehicle. This could lead to an
accident, resulting in severe injury or
death.
Turn off the adaptive cruise control
and check that the adaptive cruise
control indicator (7) disappears when
the system is not in use.