St Reference Complex - Dräger Infinity Vista Instructions For Use Manual

10 ST S
EGMENT
5. With the rotary knob, move the position of the ST measuring point to the
desired location and click the knob. As you dial, the ST deviation values to
the right of the ST waveforms change according to the new measuring point
location.

ST Reference Complex

The averaged ST segment waveform(s) displayed in the ST menu can be saved as
reference complexes. The reference waveforms can then be superimposed on the
current ST segment waveform to highlight changes in the ST segment since the last
save. Upon saving, the reference complex is time-stamped and available for display.
NOTE: If you change an ECG lead and access the ST Setup menu, you lose the saved
ST reference complex. The saved ST reference complex is retained if you change a lead
and later reselect it without entering the ST Setup menu.
STEPS: Displaying the ST Reference Complex
1. Click on the
2. Click on
STEPS: Saving the ST Reference Complex
1. Click on the
2. Click on
10-6
A
NALYSIS
parameter box.
ST
Ref to turn the display of the reference complex ON or OFF.
parameter box.
ST
. Date and time of saving appear next to the Save option.
Save
Infinity Vista VF6