Table of Contents
Advertisement
The printout is identified by the following:
z
Patient name and ID.
z
Bed label and Care Unit.
z
Date and time of the recording request.
z
Recording delay and speed.
z
Monitored parameters and values.
Crossed bell symbol for parameters whose alarm is disabled.
z
z
Recording mode (timed or continuous).
z
*** or blanks if numeric values and waveforms are unavailable.
The printout shows the top two waveforms that were displayed on the monitor's
screen at the time of the print request. A small black marker along the bottom of the
printout indicates the time of the print request.
NOTE:
z
If the second waveform channel is set to Cascade, only the waveform in the first
waveform channel prints out.
z
OCRG recordings cannot be printed on a laser printer.
VF6
Infinity Vista
R
W
ECORDING
AVEFORMS
7-9
Advertisement
Table of Contents
