Cleaning And Maintenance; General; Spare Parts; Cleaning - Mocon AMETEK Dansensor MAP Check 3 Vacuum User Manual

Dansensor MAP Check 3 Vacuum
®

Cleaning and Maintenance

General

Performing cleaning and maintenance regularly reduces the chances of equipment failure.
CAUTION! Personnel performing any maintenance or cleaning must familiarize
themselves with the
procedures.
NOTE! For correct mounting/dismounting of fittings please see
dismounting of fittings" on page

Spare parts

For a list of spare parts see

Cleaning

All of the device's surfaces should only be cleaned using a mild soap solution and a wrung
cloth.
CAUTION! Never use hard tools or abrasive materials when cleaning any part of the
device.
WARNING! Never use cleaning agents containing chlorinated solvents or acetic or
phosphoric acid. These constitute a health hazard and could damage the
instrument.

Replacing filter in the sample gas probe

We recommend that you inspect the filter
If the filter is blocked the device will indicate an error in the display. 
To replace the filter simply unscrew the connection fittings.
EN
"Safety Instructions" on page 9
19.
"Spare parts, consumables and accessories" on page
1

regularly and replace it when necessary.
User Guide
before attempting any of these
"Correct mounting/
87.
P/N 320598-G
11/2019
45