Mixer Control - Mocon AMETEK Dansensor MAP Check 3 Vacuum User Manual

30 User Guide

Mixer Control

The Dansensor® MAP Check 3 Vacuum can control a Dansensor® MAP Mix Provectus gas
mixer. The illustration below shows how to connect the devices.
Make following parameter settings:
1. In General setup select External mixer settings and set External mixer connected to
Yes.
This will fold out the gas configuration parameters. Make appropriate settings.
2. The product(s) must be setup with External mixer to Yes and then the appropriate
settings for 
mix %, buffer pressure, and gas flow must be set.
P/N 320598-G
11/2019
EN Dansensor MAP Check 3 Vacuum
®