Mocon AMETEK Dansensor MAP Check 3 Vacuum User Manual page 82

80 User Guide
From the factory the access code has been set to "0000". Type in code and press Enter.

Now access level has been changed to supervisor.

The access code can be changed to one of your own selection using the Change

administrator password function.
To return the device to user level access select Logout.
The Diagnostics function shows current temperatures, flows, pressures, and counter

statuses etc.
Press Enter to scroll through the various diagnostics items.
P/N 320598-G
11/2019
EN Dansensor MAP Check 3 Vacuum
®