Table of Contents
Advertisement
7
7-1.
BVP-E10 Series, Color Video Camera
Chapter 7 Location and Function of Parts and Controls
58
BVP-E10 Series Product Information Manual
7-1-1
Side Panels
1Handle buttons
2Viewfinder lock lever
3Assignable button
4ND filter selector
5CC filter
(BVPE10WS/ E10WSP only)
6WHITE BAL switch
7OUTPUT/DCC switch
8GAIN switch
9VTR switch
q;STATUS/CANCEL switch
qaDISPLAY switch
a
a Handle buttons
a
a
The function of each of these buttons is assignable in
the menu operation. At the factory, the frontbutton is
set to RET 1, and the rear button is set to INCOM.
RET 1 (return video 1): A return video 1 signal from the
Camera Control Unit (CCU) is displayed on the
viewfinder screen while this button is pressed.
INCOM (intercom): The intercom microphone is ON
while this button is pressed.
ON
STATUS
OFF
CANCEL
MENU
MENU
DISPLAY
GENLOCK
qdCA lock screw
qsMemory Stick slot
TESTOUT
MIC
qhTEST OUT connector
b Viewfinder lock lever
b
b
b
Locks the viewfinder after adjusting the position in the
front-to-rear direction together with the LOCK knob.
c
c Assignable button
c
c
This switch can be assigned by the user to different
functions as required. The setting can be changed
with the OPERATION Menu. On the BVP-E10/E10P, a
electronic colour temperature correction of 5,600K is
the default factory setting for this button. On the BVP-
E10WS/E10WSP, the default setting is unassigned. Set
the function with the OPERATION Menu as required.
4ND filter selector
qfLOCK knob
qgViewfinder lock ring
Advertisement
Table of Contents
