Bvf-20W/20Wce, Electronic Viewfinder; Appearances - Sony BVP-E10 Series Product Information Manual

k UP TALLY DIMMER control k
k k
Adjusts the brightness of the UP TALLY lamp.

7-18.BVF-20W/20WCE, Electronic Viewfinder

7-18-1Appearances

Viewfinder cable
Microphone holder
a Plug a a a
Connect to the VF connector on the camera.
b Stopper b b b
Prevents the viewfinder from coming off the camera
when it is slid from side to side.
c c Tally indicator (rear) c c
Illuminates up when the camera receives a tally control
signal. This indicator can be covered when not in use.
d Diopter adjustment ring d d d
Allows for optimal adjustment of focus.
e Tally indicator (front) e
e e
Illuminates up when the camera receives a tally control
signal. Turn the TALLY switch 9 OFF when not in use.
The brightness can also be adjusted with the TALLY
switch 9.
PEAKING CONTRAST BRIGHT
DISPLAY ZEBRA TALLY
ON ON HIGH
OFF OFF
OFF MOMENT LOW
*1) These controls do not affect the output signal of the video
camera.
1Plug
2Stopper
3Tally indicator
5Tally indicator
6PEAKING control
7CONTRAST control
8BRIGHT control
9TALLY switch
ZEBRA switch
q;
DISPLAY switch
qa
f f f PEAKING control f
Turning this control clockwise adjusts the picture
sharpness, and makes focusing easier. This control
has no effect on the output signals of the camera.
g g CONTRAST control
g g
Adjusts the contrast of the screen. This control has no
effect on the output signals of the camera.
h h h BRIGHT control h
Adjusts the brightness of the screen. This control has
no effect on the output signals of the camera.
i TALLY switch i
i i
Controls the tally indicator 5 located on the front of the
viewfinder.
HIGH: The tally indicator brightness is set to high.
OFF: The tally indicator is disabled.
LOW: The tally indicator brightness is set to low.
Chapter 7 Location and Function of Parts and Controls
BVP-E10 Series Product Information Manual
Eyecup
4Diopter adjustment ring
113