Sony BVP-E10 Series Product Information Manual page 82

7
Chapter 7 Location and Function of Parts and Controls
82
BVP-E10 Series Product Information Manual
g AUTO SETUP block g
g g
For automatic adjustments of cameras.
1 2
AUTO SETUP
SKIN DTL START/
LEVEL
BREAK WHITE
AUTO HUE
A Auto adjustment item select buttons
Press and light up these buttons to select the
items to be automatically adjusted.
SKIN DTL AUTO HUE: Skin tone detail
automatic hue
LEVEL: Gamma balance, knee point, master
black level, etc.
B START/BREAK button
Press to start automatic adjustment of the
selected items. The button lights during
adjustment and goes dark when adjustment is
completed. If you press the button when lit, the
automatic adjustment is canceled and the
button flashes. To stop the flashing, press the
button again.
C WHITE (white balance) button
Press to automatically adjust the white balance.
The button lights during adjustment and goes
dark when adjustment is completed. If you press
this button when lit or the START/ BREAK button,
the automatic adjustment is canceled and the
button flashes. To stop the flashing, press the
button again.
D BLACK (black balance) button
Press to automatically adjust the black balance
and black set. The button lights during
adjustment and goes dark when adjustment is
completed. If you press this button when lit or
the START/ BREAK button, the automatic
adjustment is canceled and the button flashes.
To stop the flashing, press the button again.
Notes:
• If an error occurs during adjustment, the
pressed button flashes.
• The leftmost button is for future use and has no
function at present.
h h Camera/CCU function ON/OFF buttons h h
Various functions of the video camera or the CCU can
be turned on and off from this unit. The following
switching functions are assigned to 18 of the buttons
at the factory and the other nine buttons are reserved
for future use.
KNEE DETAIL LVLDEP GAMMA CHROMA MATRIX
OFF OFF OFF OFF OFF OFF
KNEE KNEE
APERTURE SAT
5600K AUTO SKIN DETAIL SATURATION CONTRAST
KNEE DETAIL GATE
• Upper row (OFF when the button is lit)
KNEE OFF: Knee compensation function
DETAIL OFF: Detail compensation function
LVL DEP OFF: Level dependent function that
controls the details in the dark part of a picture
GAMMA OFF: Gamma function
CHROMA OFF: Chroma function
MATRIX OFF: Linear matrix function to enhance
colour fidelity
• Middle row (ON when the button is lit)
KNEE APERTURE: Knee aperture function
KNEE SAT: Knee saturation function
MONO COLOUR: Mono colour function which
replaces the colour in a picture with colour of a
single hue. The chroma level is modulated
according to the luminance signal.
3 4
COLOUR CORRECT: Colour correction function
for a certain hue range (with the BKP-7311 SD
board installed in the CCU-700A/700AP).
• Lower row (ON when the button is lit)
5600K: 5600K electronic colour temperature
BLACK
conversion function
AUTO KNEE: Auto knee function. When this button
is lit (ON), the knee point is automatically adjusted
according to the light content of the picture.
SKIN DETAIL: Skin tone detail function
DETAIL GATE: Skin tone detail gate function.
When this button is lit (ON), the adjustment range of
the skin tone detail is displayed in white on the
monitor screen.
SATURATION: Saturation function
CONTRAST: Contrast function
BLACK GAMMA: Black gamma function
CHARACTER: System information display
function. When this button is lit (ON), various
information relating to the entire system is
displayed on the monitor connected to the
CHARACTER connector of the CNU-700/500. The
display contents can be changed through a menu
operation.
i i i i Scene file control block
A SCENE FILES buttons
When the STORE button is dark: The stored
While the STORE button is flashing: When
B STORE button
To store a scene file, first press this button so
that the button starts flashing, then press the
SCENE FILES button of the desired number.
When file registration is completed, the STORE
button goes dark. To cancel the registration,
press the flashing button again before pressing
the SCENE FILES button. The STORE button
goes dark.
MONO COLOR
COLOR CORRECT
BLACK CHARACTER
GAMMA
1
1 2 3 4 5
SCENE FILES
data can be retrieved by pressing and
lighting up the button of the desired number.
Press the lit button to turn it dark and resume
the previous status.
you press one of these buttons, the current
setting data is stored as a file of the
corresponding number.
2
STORE