To Turn On/Off The Buzzers Independently; To Turn Off All The Buzzers; To Adjust The Brightness Of The Leds; To Adjust The Brightness Of The El Display - Sony BVP-E10 Series Product Information Manual

8
Chapter 8 Menu Settings
126
BVP-E10 Series Product Information Manual
Note
[LED Disp Bright] is displayed with the MSU-750
only.
2.
Press [Buzzer] to set it to inverse video.
The lower half of the display becomes the Buzzer
Volume Level adjustment display.
Clear
LED LED Disp
Buzzer
EL Bright
Bright
Buzzer Volume Level
Call Touch
Buzzer Click
Call Touch Switch
30 85 68
3.
Adjust the levels with the three control knobs.
Call: volume of the buzzer when a call signal is
received
Touch: volume of the buzzer when a button
displayed on the EL menu display is operated
Switch: volume of the buzzer when a button on the
control panel is operated. The master volume can
be adjusted with the rightmost control knob.
8-1-4-4 To turn on/off the buzzers
independently
Press the corresponding button. When it is in inverse
video, the buzzer is on.
[Call Buzzer]: For the buzzer sound when a call
signal is received
[Touch Click]: For the buzzer sound when a
button displayed on the menu display is
operated
[Switch Click]: For the buzzer sound when a
button on the panel is operated
8-1-4-5

To turn off all the buzzers

Press [All Off].
When the adjustment is completed
Press [Home] to return to the MSU adjustment menu,
and press [Exit] to release the menu operation.
8-1-4-6

To adjust the brightness of the LEDs

You can adjust the brightness of the LEDs of the panel
buttons and camera number/tally indication window.
To adjust the brightness, proceed as follows.
1.
Press [MSU Adjusting] on the MSU Configuration
menu to display the MSU adjustment menu.
2.
Press [LED Bright] to set it to inverse video. The
lower half of the display becomes the LED
Brightness adjustment display.
Clear
Buzzer
Home
1
Switch
1
Bright
3.
Adjust the brightness with the three corresponding
Switch
control knobs.
All Off
Click
Master
66
When the adjustment is completed
Press [Home] to return to the MSU adjustment menu,
and press [Exit] to release the menu operation.
8-1-4-7
You can adjust the brightness of the display of the
menu control block. To adjust the brightness, proceed
as follows.
1.
Press [MSU Adjusting] on the MSU Configuration
menu to display the MSU Adjustment menu.
2.
Press [EL Bright] to set it to inverse video. The
lower half of the display becomes the EL Display
adjustment display.
Clear
Buzzer
Level
3.
Adjust the brightness with the leftmost control knob.
When the adjustment is completed
Press [Home] to return to the MSU adjustment menu,
and press [Exit] to leave this menu.
8-1-4-8
You can adjust the brightness of the LED displays
(camera number indicators) on the control panel. To
adjust the brightness, proceed as follows.
1.
Press [MSU Adjusting] on the MSU Configuration
menu to display the MSU Adjustment menu.
2.
Press [LED Disp Bright] to set it to inverse video.
LED LED Disp
EL Bright
Bright Bright
LED Brightness
Tally Other LED
72 78 93
Switch: Brightness of the built-in LEDs of the
control buttons
Tally: Brightness of the built-in LEDs of the
camera number/tally indication window
Other LED: Brightness of the other LED
indicator, such as those of the camera select
block and the ACCESS indicator
The master brightness can be adjusted with the
rightmost control knob.
To adjust the brightness of the EL
display
LED LED Disp
EL Bright
Bright Bright
EL Display Brightness
50
To adjust the brightness of the LED
camera number displays (MSU-750
only)
Home
1
1
Master
78
Home
1
1