Checking The Camera Picture On The Viewfinder And/Or Color Video Monitor - Sony SRW-9000 Operation Manual

For details, see "Setting the Camera Outputs" (page
56).
HD monitor
Note
No video appears if MONITOR OUT in the <POWER
SAVE> page of the Camera >MAINTENANCE menu is
set to PWR SAVE. Set it to ACTIVE.
Checking the Camera Picture on
the Viewfinder and/or Color Video
Monitor
Normally, the signals output from the TEST OUT
connector, HD SDI MON1 connector and the HD
SDI MON2 connector switch from the camera
picture to the recorded picture during playback.
The viewfinder and an external monitor also
switch to the recorded picture. However, by
setting VF/VBS and MON on the <PB/MON
LUT> page of the Camera >OPERATION menu,
you can choose to output the camera picture even
during playback.
To output VTR playback signals to the
viewfinder, TEST OUT connector, HD SDI MON1
connector and HD SDI MON2 connector
Set VF/VBS and MON on the <PB/MON LUT>
page (see page 131) of the OPERATION menu to
AUTO.
94 Playback – Checking the Recording
HDSDI input
To output VTR playback signals to the HD SDI
MON1 and HD SDI MON2 connectors, and output
the camera picture to the viewfinder and the
TEST OUT connector
On the <PB/MON LUT> page (see page 121) of
the OPERATION menu, set MON to AUTO and
set VF/VBS to CAM.
HD monitor /SD monitor
Video input
(analog)
HDSDI input
HD monitor