Table of Contents
Advertisement
11-6.CCU-900/ 900P, Camera Control Unit
General
Power supply
Current consump-
tion
Peak in rush current
(1) Power ON, cur-
rent probe method:
(2) Hot switching
inrush current,
measured in
accordance with
European standard:
Dimensions
Environment for installing and using the equipment
•Avoid rooms of high temperature or placing near a
heat source.
•Avoid a place with strong electric or magnetic field.
•Set in a cool, dry place.
•Keep out of direct sunlight or other strong light.
Input/Output connectors
CAMERA
INCOM/TALLY/PGM D-sub 25-pin connector (1)
INCOM REMOTE
RCP/CNU
TRUNK LINE 1/
TRUNK LINE 2
100/110-120/220-240 V AC,
50/60 Hz
5 A (at 100 V AC, entire sys-
tem active)
80 A (240 V) 60 A (100 V)
EN55103-1: 10 A (230 V)
3
(16
/
)
424
4
465
481
Optical-fiber connector (1)
1.08Gb/s SDI 'L 2, 240 V
AC power supply
• INCOM-4W, 2 systems (PD/
ENG), 0 dB
• PGM, 2 systems, 0 dB/-20
dB
• TALLY (R, G), TALLY
contact
D-sub 25-pin (1)
8-pin multiconnector (1)
D-sub 9-pin, female (1)
RS-232C, for CHU transmis-
sion
Operating tempera-
5°C to 40°C (41°F to 104°F)
ture
Storage temperature -20°C to +60°C (-4°F to
+140°F)
Humidity
no condensation
Dimensions (w/h/d) Approx. 424 x 133 x 460 mm
(16
x 5
3/4
Mass (Approx.)
Approx. 20 kg (44 lb 1 oz)
AUX 1/AUX 2
D-sub 9-pin, female (1)
RS-422, for CCU system
expansion
Input connectors
AC IN
100 to 120, 220 to 240 V AC
switchable
PROMPTER IN
BNC-type (1), with loop-
through output, SMPTE-
292M analog signal,
1.0 Vp-p, 75-ohms
SERIAL RET INPUT BNC-type (4), SMPTE-259M,
0.8 Vp-p, 75 ohms,
270Mb/s bit rate
REFERENCE IN
BNC-type (1), with loop-
through output,
composite SYNC/VS
RET INPUT
BNC-type (4), 1.0 Vp-p, 75
ohms, analog signal
AUX IN
BNC-type (1)
SDI video signal
0.8 Vp-p, 75 ohms,
270Mb/s bit rate
BVP-E10 Series Product Information Manual
x 18
inches)
1/4
1/8
Chapter 11 Specifications
179
Advertisement
Table of Contents
