Table of Contents
Advertisement
required, set the line outside the rotation range of the
IRIS control.
k AUTO button
k
k
k
Press and light the button to automatically adjust the
iris according to the amount of input light. When this
button is lit, the reference value for automatic iris
adjustment can be set in a range of ± 2f with the iris
control. If you press the button when lit, it goes dark
and manual iris adjustment is enabled.
7-13-4Connector Panel
1 CCU/CNU REMOTE connector
2 AUX REMOTE connector
REMOTE
EXT I/O
CCU/CNU
AUX
a CCU/CNU REMOTE (camera control unit/camera
a
a
a
command network unit remote) connector (8-
pin)
Connect to the RCP/CNU connector of a camera
control unit or the RCP connector of a camera
command network unit.
b AUX REMOTE (auxiliary remote) connector (8-
b
b
b
pin)
Connect to the RCP-700/701.
c
c EXT I/O (external input/output) connector (9-pin)
c
c
Provides preview function to control an external
switcher for camera monitoring
Caution
When installing this panel, provide a gap of 7 cm (3
inches) or more behind the connector panel to prevent
damage to cables.
3 EXT I/O connector
Chapter 7 Location and Function of Parts and Controls
BVP-E10 Series Product Information Manual
101
Advertisement
Table of Contents
