Heartland VALUE Series Assembly Manual page 65

• Follow directions provided by manufacturer and these instructions.
Familiarize yourself with a 3-Tab Shingle.
Half A Rain Slot
BEGIN
Install first starter row upside down and color up with a 1" overhang at back and bottom of roof panel. Use (4) nails per shingle.
1
Starter row must be straight and level all the way across with lower edge of roof deck.
NOTE: If you have installed drip edge install shingles flush to drip edge.
FRONT OF
SHED
Shingle overlaps roof
decking.
SHINGLES
- NOT INCLUDED -
Notch
SHINGLE NAIL PATTERN
1"
(1,3 cm)
(2,5 cm)
Full Rain Slot
NEVER DRIVE FASTENERS INTO OR ABOVE SEALING STRIPS.
(4) Nails
Notch
1/2"
Sealing Strip
NAILS
TABS UP
1" (2,5 cm) overhang
past roof deck.
63
1"
(2,5 cm)
BACK OF
SHED
1" (2,5 cm) overhang or fush
with drip edge.