Heartland VALUE Series Assembly Manual page 29

PARTS REQUIRED:
x12
6 x 24" (15,2 x 60,9 cm)
AD
x14
2 x 4 x 65" (5,1 x 10,2 x 165,1 cm)
x1 OO
Temporary Support
69" (175,3 cm) Door Stiffener
BEGIN
Place (2) rafter-halves AD in the corner of back and side walls, fl ush to panels and studs.
1
Flush rafters at peak. Secure gusset to rafters with 2" nails following the pattern shown (FIg. A).
Flush
1/4" 1/4"
(1,9 cm) (1,9 cm)
Fig. A
HINT:
Use fl oor and walls to help
assemble rafters!
SET ASIDE THESE TWO RAFTER ASSEMBLIES.
Place (2) rafter-halves AD in the corner of back and side walls, fl ush to panels and studs (STEP - 1).
2
Flush rafters at peak. Secure gusset to rafters with 2" nails following the pattern shown (FIg. A).
Flip over rafter assembly and fasten second gusset to other side with 2" nails (FIg. C).
3
Fig. B -
Build 2
120"
(304,8 cm)
(243,8 cm)
FINISH
Your rafters are now assembled.
Build (2) rafter assemblies with (1) gusset (Fig. B).
Temporary support (OO)
Build 5 rafter assemblies with (2) gussets (Fig. C).
96"
RAFTERS
120"
(304,8 cm)
Fit base of rafters in corners
of back wall.
Fig. C -
27
x144
2" (5,1 cm)
Flush at peak
Build 5
96"
120"
(243,8 cm)
(304,8 cm)