Heartland VALUE Series Assembly Manual page 64

• Use acrylic latex caulk that is paintable. Caulk at all horizontal and vertical seams, between the trim and walls, and all
around the door trim.
• Use a high quality exterior acrylic latex paint. When painting your building, there are a few key areas that can be easily
overlooked that must be painted:
• Bottom edge of all siding and trim
• Inside of doors and all 4 edges
Note:
Prime all un-primed exterior wood before painting.
(Follow directions provided by manufacturer.)
• Install felt flush to all roof edges overlapping 3". Use minimal amount of roofing nails to hold in place.
• Install drip edge over roof felt on gable side and
under roof felt on eave side (Fig. A).
• Do not use nails on side of drip edge that hangs over side of building.
• Only nail top of drip edge as shown.
Fig. A
Drip edge
PAINT & CAULK
- NOT INCLUDED -
ROOF FELT
- NOT INCLUDED -
Flush
Flush
DRIP EDGE
- NOT INCLUDED -
Roof felt
Drip edge
62
OK to overlap at ridge.
3" OVERLAP
Edge fush
to trim.
Snip bottom side of drip edge and
bend over to other side of roof.
(Follow directions provided by manufacturer.)