COLLAR TIE
PARTS REQUIRED:
x6
3" (7,6 cm)
x1
TM
2 x 4 x 72" (5,1 x 10,2 x 182,9 cm)
BEGIN
1
Install collar tie TM to the 3rd rafter from the front with (3) 3" nails at each end.
3" (7,6 cm)
Nails
Flush to panel
Flush to panel
TM
HINT: For best appearance,
install collar tie on back
side of rafter.
FINISH
Your collar tie is now installed.
59