Heartland VALUE Series Assembly Manual page 60

PARTS REQUIRED:
DT
x2
19/32" x 2-1/2" x 28-1/8" (1,5 x 7,6 x 71,4 cm)
x1
4
Locate one shutter centered on marks as shown.
Install one shutter using a 2" fi nishing
5
nail at "dot".
Nail into wall frame inside.
Working from inside, secure the shutter
indicated at "X" with (3) 3/4" screws.
Repeat steps to install shutter on
opposite side.
Locate DT centered on mark and
6
fl ush to shutters, as shown.
Install with 2" fi nishing nails.
Nail into window frame inside.
FINISH
Your window and shutters are
now installed.
WINDOW & SHUTTERS
x1
3/4" Screws
from inside
x6
3/4" (19 mm)
CENTER
2" Finishing nails
into wall frame.
DT
Flush
Flush
58
x20
2" (5 cm)
Mark
CENTER
CENTER
DT
2" (5,1 cm) Finishing nails
CENTER
Mark
CENTER
Flush
Flush