SANY SY265C LC Operation And Maintenance Manual page 91

SY265C LC/SY265C LR Excavator OMM
Shear Screen
Use the Shear screen to enable the joystick switches for
shear or other two-way flow tool operation, and to adjust
the hydraulic oil flow for the selected tool.
Set the Shear Rotational Flow Rate:
1. Press F4 to select the shear rotational flow rate
adjustment.
2. Press F1 to decrease or F2 to increase the hydraulic oil
flow rate for rotation of this tool.
NOTE: The available range is 0 gpm–53 gpm
(0 Lpm–200 Lpm).
As the numeric values for liters per minute and gallons per
minute change, the bar indicator (1) will graphically show
the hydraulic oil flow rate.
Set the Shear Open/Close Flow Rate:
1. Press F4 to select the shear O/C flow rate adjustment.
2. Press F1 to decrease or F2 to increase the hydraulic oil
flow rate for the open/close function of the shear.
NOTE: The available range is 0 gpm–132 gpm
(0 Lpm–500 Lpm).
As the numeric values for liters per minute and gallons per
minute change, the bar indicator (2) will graphically show
the hydraulic oil flow rate.
3. Press F3, then turn the key switch to OFF, and then
back to ON, to enable the joystick switches for two-way
flow tool operation, confirm the hydraulic oil flow
rates, and place the shear icon (3) on the home screen.
4. Press F5 to return to the Tool Select screen without
making any changes.
SANY
Fig. 3-59
Fig. 3-60
Operation and Maintenance Manual — 0420
1
2
F1 F2 F3 F4 F5
0004563, 0004622
3
0004598
3-51