SANY SY265C LC Operation And Maintenance Manual page 139

SY265C LC/SY265C LR Excavator OMM
5. With the engine running at low idle, press the
stationary regeneration switch (5) on the right control
console.
NOTE: Do not move the hydraulic lockout control
lever or throttle control dial during
regeneration. Regeneration will stop if either
the throttle dial or hydraulic lockout lever is
moved, which will require the process to be
started again.
6. The engine rpm and turbocharger sounds may increase,
the high exhaust system temperature (HEST) lamp (6)
may illuminate, and the regeneration lamp will flash.
NOTE: When the regeneration is complete, the engine
will return to idle speed, and the HEST and
regeneration lamps will turn off.
SANY
5
Fig. 4-65
Fig. 4-66
Operation and Maintenance Manual — 0420
6
0005313
0004595
4-47