6. Remove the filter element (3) from the filter housing.
7. Clean the inside of the pilot filter bowl with clean fuel.
8. Install a new gasket and O-ring.
9. Install a new pilot filter element inside the pilot filter
bowl.
10. Install the pilot filter bowl.
11. Check the oil level in the tank and add oil if needed.
See "Add Hydraulic Oil" on page 5-68.
12. Start the machine and check for leaks.
5-72
Fig. 5-90
Operation and Maintenance Manual — 0420
SY265C LC/SY265C LR Excavator OMM
3
0005270
SANY