SANY SY265C LC Operation And Maintenance Manual page 150

NOTE: If no work equipment is attached, back the
machine onto the trailer.
NOTE: The machine may lean forward when it passes
over the trailer wheels.
5. Move the machine slowly until the tracks make full
contact with the trailer.
6. Raise the work equipment slowly and high enough to
avoid hitting the trailer or truck.
7. Swing the machine so the work equipment faces the
back of the trailer.
8. Place a support block (6) on the trailer under the work
equipment.
9. Fully extend the bucket cylinder and arm cylinder.
10. Lower the work equipment onto the support block.
11. Shut down the machine and remove the key from the
key switch.
NOTE: Wait 2 minutes before turning the battery
disconnect switch to OFF.
12. Close and lock the windows.
13. Exit the cab.
4-58
Operation and Maintenance Manual — 0420
SY265C LC/SY265C LR Excavator OMM
Fig. 4-80
Fig. 4-81
Fig. 4-82
6
Fig. 4-83
0000099
0000100
00000101
00000102
SANY