SANY SY265C LC Operation And Maintenance Manual page 118

2. Make sure that the emergency stop toggle switch (3) is
set to its forward position with its red cover (3) down.
3. Set the throttle control dial (4) to MIN (low idle).
4. Turn the key switch (5) to ON and check the monitor.
If all readings are normal and no fault codes are
present, the display will return to the default page
within 2 seconds.
NOTE: The monitor displays the home screen after the
key switch is turned to the ON position.
4-26
Fig. 4-34
Operation and Maintenance Manual — 0420
SY265C LC/SY265C LR Excavator OMM
2
3
4
Fig. 4-35
0005256
5
0005312
SANY