SANY SY265C LC Operation And Maintenance Manual page 90

Breaker Screen
Use the Breaker screen to enable the right joystick rocker
switch for breaker or other one-way flow work tool
operation, and to adjust the hydraulic oil flow for this tool.
1. Press F2 to increase or F1 to decrease the hydraulic oil
flow rate as needed.
NOTE:
The available range is 13.2 gpm–105.6 gpm
•
(50 Lpm–400 Lpm).
The numeric values for liters per minute and
•
gallons per minute will change and the bar
indicator (1) will fill and empty to graphically
display the hydraulic oil flow rate.
2. Press F3 to confirm the setting and place the breaker
icon (2) on the home screen.
3. To return to the Tool Select screen without making any
changes, press F5.
4. Turn the key switch to OFF and back to ON. The
rocker switch on the right joystick is now enabled for
one-way flow work tool operation.
3-50
Operation and Maintenance Manual — 0420
SY265C LC/SY265C LR Excavator OMM
1
F1 F2 F3
Fig. 3-57
Fig. 3-58
F4 F5
0004562, 0004622
2
0004597
SANY