SANY SY265C LC Operation And Maintenance Manual page 86

Data Unit Setting Screen
Use this screen to select which units of measure (metric or
Imperial) are displayed on the monitor:
NOTE: This screen defaults to highlight the metric
data unit option, even with the Imperial unit
format in effect.
1. Navigate to this option on the System Setting screen,
then press F3.
2. Press F1 to move between the two options.
3. Press F3, then turn the key switch to OFF, and then
back to ON, to confirm the selection.
4. Press F5 to return to the System Setting screen without
making any changes.
3-46
Fig. 3-52
Operation and Maintenance Manual — 0420
SY265C LC/SY265C LR Excavator OMM
F1 F2 F3 F4 F5
0004560, 0004622
SANY