Operator Safety Information - SANY SY265C LC Operation And Maintenance Manual

OPERATOR SAFETY INFORMATION

It is impossible to compile a list of safety precautions that covers every situation. However, there are basic
principles which must be followed when operating this machine:
Only qualified personnel who have been specifically trained on this machine are permitted to operate
•
and/or work on this machine.
The seat belt must be worn by the operator at all times.
•
Operator aids such as warning lights, horns, or buzzers, along with displays on the monitors, are designed
•
to alert the operator to potential problems. Sole reliance on these operator aids in place of good operating
practices can lead to an accident. Inspect the operator aids of this machine daily and make sure each
operator aid is in normal working condition. Any faults found shall be reported to a SANY dealer. Stop all
work immediately if any operator aid is not working properly.
All accident prevention guidelines, operating instructions, etc., are based on the intended usage of the
•
machine.
Read and understand this manual and any accompanying manuals before operating this machine.
•
This manual must be readily available to the operator at all times and must remain in the cab while the
•
machine is in use.
Make sure all personnel in the working area around the machine are thoroughly familiar with the safe
•
operating practices stated in this manual.
Review the local, state, and federal regulations and standards regarding this machine and its operation.
•
Work practice requirements may vary among government regulations, industry standards, and employer
policies. A thorough knowledge of all such relevant work rules is required before operating this machine or
performing maintenance on it.
Check the Maintenance Log before the start of each workday shift. Make sure routine maintenance has
•
been performed as stated in this manual. Do not operate a damaged or improperly maintained machine.
Only the operator is to be on the machine while it is in operation.
•
Be sure all underground utilities have been marked before excavating.
•
2-4
Operation and Maintenance Manual — 0420
SY265C LC/SY265C LR Excavator OMM
SANY