Configuring Bluetooth Communications For Wireless Printing; Creating An Application That Lets You Print Wirelessly - Intermec CK32 User Manual

Configuring Bluetooth Communications for Wireless Printing

CK32 I-Safe Handheld Computer User's Manual
Use this table to understand the settings you see in the Bluetooth
menu in Intermec Settings.
Bluetooth Settings
Setting Description
Power Set and view whether the Bluetooth radio is on or
off.
Class of Device Determines how the device appears to other devices
during discovery.
Discoverable Makes the CK32 I-Safe discoverable.
Connectable Makes the CK32 I-Safe connectable.
IBT Displays the version of the Intermec Bluetooth
Library.
Radio Displays the version of the Bluetooth Radio
Hardware.
Device Address Displays the Bluetooth address of your CK32 I-
Safe.
This section explains how to configure the CK32 I-Safe for
Bluetooth wireless printing. You need to:
• make sure Bluetooth power is on. For help, see the procedure
in "Setting Up Bluetooth Communications" on page 43.
• create an application that lets you print. For help, see the next
section.
• select the current wireless printer on the CK32 I-Safe. For
help, see "Selecting the Current Wireless Printer on the
CK32 I-Safe" on page 46.

Creating an Application That Lets You Print Wirelessly

The CK32 I-Safe does not ship with an application that lets you
print wirelessly. You must create an application that opens the
wireless printing COM port on the CK32 I-Safe. For help, see
the Bluetooth Resource Kit section of the IDL Resource Kit
Developer's Guide, P/N 934-006-xxx.
The Wireless Printing applet is available from Start > Settings >
System. The applet separates the task of wireless printing setup
from other Bluetooth management tasks.
Chapter 3 — Configuring the CK32 I-Safe
45