Intermec EasyCoder F2 User Manual page 30

Chapter 4 Media Load
Peel-Off, cont.
3
Pull out the handle to collapse the takeup hub, then
remove any liner.
5
Fit a new roll of labels on the supply post and adjust
the edge guide so the label roll becomes fl ush with
the center section.
28
4
Remove any empty core from the media supply
6
Remove labels from the fi rst 50 cm (20 inches) of the
liner. Route the liner through the print mechanism
and push it inwards.
Intermec EasyCoder F2 – User's Guide
roll post.