Rfid 13.56 Mhz Interface Board (Option) - Intermec EasyCoder F2 User Manual

RFID 13.56 MHz Interface Board
Intermec EasyCoder F2 – User's Guide
The RFID 13.56 interface kit consists on an RFID antenna fi tted
inside the lower part of the print mechanism and an interface
board.
The interface board contains the harware for reading and writing
13.56 MHz RFID tags. It also has a serial communication port
("uart2:") that is identical to the "uart2:" port on the Double
Serial Interface Board and the Industrial Interface board.
By switching some straps and circuits, this port can be confi gured
for one of the following alternatives:
RS-232
RS-422 Non-isolated
RS-422 Isolated
RS-485
For further information, refer to the documentation that comes
with the board.
Appendix 3 Interfaces
Serial No Label
"uart2:"
107