Table of Contents
Advertisement
Procedure:
1.
Plug the brain tracking unit into the front socket of the SENSE.
2.
Plug the IR transmitter into a backup battery. Put the battery backup on a
3cm high surface.
3.
Connect the SENSE to the PC using the USB cable.
4.
Run the RobocklySense software.
5.
Move to Block
Create a program that rotates the SENSE to the left until it "sees" the IR
transmitter and then tracks it without moving (just rotates).
6.
Build the following program and its main procedure:
7.
Observe the program and make sure that you understand all of its
instructions.
8.
Download the program.
69
mode.
Advertisement
Table of Contents
