NeuLog Sense Autonomous Manual page 13

Procedure:
1. Observe the SENSE.
2. Identify the communication cable inlet.
3. Hold the SENSE and turn it.
4. The SENSE includes:
 Two motors with wheels.
 One pivot wheel.
 Five range sensors made of an infrared (IR) LED and phototransistor
each.
 A line (black or white) sensor made of an infrared LED and
phototransistor too.
Identify them.
5
Right back sensor
6
Right front sensor
5. Connect the SENSE to the PC using the USB cable.
7
Front sensor
2
Left back sensor
Left front sensor
1
Bottom sensor
4
3