NeuLog Sense Autonomous Manual page 33

8. Create the following program, which moves the SENSE forward for 3
seconds and stops.
9. Click on the Save
CART1.
10. Click on the Program Download
11. Place the SENSE on the table or on the floor and click on the Run
button.
The SENSE will move forward for 3 seconds and then stop.
12. Disconnect the SENSE from the PC and plug in the battery module (BAT-
202).
13. Press the SENSE panel button and you will see the robot move forward for
3 seconds and then stop.
The SENSE LED blinks while running.
14. Connect the SENSE to the PC.
27
button and save the program under the name
button.