Table of Contents
Advertisement
1.2.2
Program download
1.
The SENSE controller is also a computer with a memory.
We can download the program into its memory.
2.
Click on the Program Download
This will transfer the PC program into the SENSE flash memory and will
replace a previous saved program.
3.
Click on the Run
The SENSE will move forward for 3 seconds and then stops.
While running, the menu line is changed to the following with Stop button
on the right.
4.
To run the program in the SENSE memory, we can also use the Start/Stop
orange pushbutton located on the SENSE panel.
Press the SENSE panel button and you will see the SENSE move forward
for 3 seconds and then stop.
5.
The SENSE comes with an adapter for external battery. Such battery can be
a standard Power Bank with USB outlet.
You may also have the NeuLog battery module BAT-202, which
can be plugged directly into one of the SENSE sockets
When connecting such battery to the SENSE and disconnecting
it from the PC, the robot becomes an independent robot running
on its internal program in its flash memory.
Connect the battery to the SENSE socket and disconnect the SENSE from
the PC.
The menu line is changed to the following:
17
button.
button.
Advertisement
Table of Contents
