Table of Contents
Advertisement
6.
Click on the General button and select the Delay instruction block.
Drag this block and attach it under the Drive instruction block.
7.
Change the delay value to 3 seconds.
8.
Click on the Sense button and select the Stop instruction block.
Drag this block and attach it under the Delay instruction block.
The Stop instruction will be executed 3 seconds after the Drive Forward
instruction.
9.
Click on the Program button and select the Program End instruction block.
Drag it under the Stop instruction block.
10. Check that you have the following program:
11. Click on the Save
PROG1.
16
button and save the program under the name
Advertisement
Table of Contents
