Table of Contents
Advertisement
1.4
RobocklySense
The RobocklySense is a visual block-programming editor. It uses blocks that link
together to build a program instead of writing code texts.
The RobocklySense uses special blocks that can read the inputs, operate the
outputs, and read any of the data from NeuLog sensors.
The RobocklySense is very user friendly and it is easy to create and run robotics
programs.
1.5
RobocklySense installation
The software and drivers must be installed before connecting any modules
to the PC or MAC.
1.
Download RobocklySense Application from: www.neulog.com.
2.
Follow the instructions on the screen. The installation process is
straightforward and the required drivers are installed automatically.
The installation is composed of two parts: RobocklySense software installation
and USB driver installation. After the installation process is completed, the
RobocklySense software is ready to use.
The RobocklySense shortcut icon
Notes:
Upgrading the software can be done at any time. Installing the upgraded software
just replaces the relevant files, so uninstalling the software before upgrading is
not necessary.
During an upgrade, the software the USB driver installation can be skipped by
clicking the Cancel button.
4
should appear on the PC desktop.
Advertisement
Table of Contents
