Table of Contents
Advertisement
1.
Observe the Direct screen and the read values around the SENSE picture.
These values are the read values of the SENSE sensors.
2.
Place the SENSE on a white surface.
The value of the bottom sensor should be above 500.
3.
Place the SENSE on a black surface.
The value of the bottom sensor should go down dramatically.
Note that there may be a big variation in the read value between different
black surfaces.
4.
Place the SENSE robot at different distances from a wall and observe the
effect on each of the five wall sensors.
Note:
The read value of each sensor for the same distance may be different from
sensor to sensor.
11
Advertisement
Table of Contents
