Table of Contents
Advertisement
Procedure:
1.
Connect the SENSE to the PC using the USB cable.
2.
Run the RobocklySense software.
3.
Move to Block
4.
Click on the Open
5.
Check that you have the following program:
If not, build this program and save it under the name CART2.
6.
Place the SENSE between two black lines and run the program.
The SENSE should run back and forth between the lines.
Increasing the distance between the lines changes the SENSE's travel
accordingly.
7.
Stop the program.
8.
Drag the program to the Trash box in order to clear the screen.
32
mode.
button and open the program CART2.
Advertisement
Table of Contents
