Changing Brain Unit Id - NeuLog Sense Autonomous Manual

58
2.3

Changing Brain unit ID

As said before, every brain unit has ID number. The ID number enables us to use
up to nine brain units of the same kind. We just have to take care that each one of
them will have different ID number.
In Direct mode screen, we have a special icon for changing the ID number of the
unit.
The following screen is the Direct screen of the motion sensor.
Clicking on the icon on the right, will show the following screen:
In order to change the ID number of the unit, we have to connect only one unit to
the PC, to set the required ID number in the Set ID field and to click on the Set
ID button.