Table of Contents
Advertisement
6.
Run the RobocklySense software.
The Direct screen appears:
The direct mode enables you to test the system and the sensors' readings before
programming and running the programs. This stage saves a lot of frustration in
development.
This Direct mode window is for manual control and test of the robot optional
units: Sense, Robo, Robo Ex, Brain arm, Brain servo, Brain motor or NeuLog
sensor.
The following screens are Direct mode windows of the Robo, Brain arm and
NeuLog sensor.
Brain arm and NeuLog sensor are explained in chapter 3.
The Direct screen is changed according to the selected unit. Each unit has its own
default ID number. The user can change the module ID number. In this book, we
shall refer to the default ID number of the unit as 1.
8
Advertisement
Table of Contents
