Things To Check First; Configuration->Receiver - Javad JNSGyro-4T Operator's Manual

TR O U B L E S H O O T I N G
6

Things to Check First

Things to Check First
Before contacting JNS Customer Support about any problems with the
JNSGyro-4T system, refer to the following list of basic suggestions that may
help:
• Go through all external receiver connections carefully and make sure they are
not wrong or loose.
• Double-check the cables. Cables became defective more often than the
devices do.
• Check the sections below for available solutions.
• Reset the unit's boards using PCView (Tools->Reset receiver).
• Restore factory default settings of the boards using PCView (click
Configuration->Receiver, then Set all parameters to defaults).
• Clear the NVRAM (see "Clearing the NVRAM" on page 4-16).
• Initialize the file system (click Tools->Initialize file system; this will erase
all files inside the receiver).
WARNING: Do not attempt to repair equipment yourself. Doing so
will void your warranty and may damage the
hardware.
6-2 JNSGyro-4T Operator's Manual www.javad.com