Edit Script - Javad JNSGyro-4T Operator's Manual

A P P E N D I X
A
Creating Scripts
Click Edit script.
4.
Navigate to the folder in which you want to save the script file.
5.
Type the file name. All files have a .jpc extension.
6.
For example, m20.jpc.
Click Yes to create the file.
7.
Type in the appropriate commands, pressing Enter or clicking Send
8.
command after each one (use the commands from "Scripts" on page A-3).
Click Save script.
9.
Click Close editor.
10.
Once you have created a script file,
Click Load script on the Manual Mode dialog box.
1.
Navigate to the folder that contains your script file.
2.
Select the appropriate script file and click Send command.
3.
A-2 JNSGyro-4T Operator's Manual
Figure A-2. Edit script
www.javad.com