Receiver Configuration - Minpad Tab - Javad JNSGyro-4T Operator's Manual

C O N F I G U R A T I O N
2
JNSGyro-4T Configuration
If your jobsite is in an area that has obstructions (buildings, trees, etc.), and/or
the antenna location is near reflective objects, configure the board to reduce
errors from these sources.
Click the Advanced tab on the Receiver Configuration screen and then
4.
click the Multipath Reduction subtab. Enable the following boxes, and
click Apply (Figure 2-8 on page 2-9):
• Code multipath reduction
• Carrier multipath reduction
2-8 JNSGyro-4T Operator's Manual
Figure 2-7. Receiver Configuration – MinPad Tab
www.javad.com