Chapter 5. Troubleshooting; Things To Check First - Javad JNSGyro-2T Operator's Manual

T
In general, as long as you follow the maintenance and safety instructions pro-
vided in this manual, you should have few problems with your JNSGyro-2T
system. This chapter will help you diagnose and solve some common, minor
problems you may encounter with your JNSGyro-2T system.
Chapter Tip: For assistance with complex problems, see "Obtaining Technical
Support" on page 68.

Things to Check First

Before contacting JNS Customer Support about any problems with the JNS-
Gyro-2T system, refer to the following list of basic suggestions that may help:
• Go through all external receiver connections carefully and make sure they
• Double-check the cables. Cables became defective more often than the
• Check the sections below for available solutions.
• Reset the unit's boards using PCView (Tools->Reset receiver).
• Restore factory default settings of the boards using PCView (click
• Clear the NVRAM (see "Clearing the NVRAM" on page 58).
• Initialize the file system (click Tools->Initialize file system; this will erase
Warning: Do not attempt to repair equipment yourself. Doing so will
void your warranty and may damage the hardware.
www.javad.com
ROUBLESHOOTING
are not wrong or loose.
devices do.
Configuration->Receiver, then Set all parameters to defaults).
all files inside the receiver).
5
JNSGyro-2T Operator's Manual 65