Javad JNSGyro-4T Operator's Manual page 63

Table 4-1. FN Key Functions and REC LED Status (Continued)
FN Key
When data recording is ON, and the FN key is...
Not pressed
Pressed for < 1 second
Pressed for 1–5
Pressed for 5–8 seconds
Pressed for > 8 seconds
www.javad.com
REC LED
Red
If FN key mode is «LED blink mode switch»
Green
If FN key mode is «Occupation mode switch»
Green
Orange
If FN key mode is «LED blink mode switch»
Orange
If FN key mode is «Occupation mode switch»
Orange
No light
Red
No light
Status
No free memory; hardware problem with data
recording.
Data recording started (post-processing
occupation mode undefined).
Data recording started (Kinematic post-
processing occupation mode).
Data recording started (Static post-processing
occupation mode).
Release to change information mode.
Release to toggle between Static and Kinematic
post-processing modes.
Release to stop data recording.
Release to turn serial port A baud rate to 9600
bps.
No function (data recording still on).
JNSGyro-4T Operator's Manual 4-5
O P E R A T I O N
Using MinPad