Set Device Type - Javad JNSGyro-4T Operator's Manual

4.
5.
6.
7.
www.javad.com
Activate FLoader (Figure 4-14).
On the Connection tab, select the COM port on your computer that connects
with your board and select its speed (usually 115200).
Select the Device tab and set the Device Type as Receiver (Figure 4-15).
Click Get from Device for device information (Figure 4-15).
Figure 4-14. Floader Main Screen
Figure 4-15. Set Device Type
O P E R A T I O N
Loading New Firmware
JNSGyro-4T Operator's Manual 4-21