www.javad.com
The specified link rate
is not compatible with
the
link
rates
the
modem supports.
The link rate is the rate
at which data transmits
over the RF link.
The
specified baud
rate is not compatible
with the baud rates the
modem supports.
The baud rate is the
rate
at
which
the
receiver
transmits
differential messages
to the modem and vice
versa.
The distance between
Base and Rover is too
far.
Problem
Change the link rate to that which your modem supports.
See the modem's manual for link rate support information.
Change the baud rate to that which your modem supports.
See the modem's manual for baud rate support information.
Close the distance between the Base and Rover.
Use repeaters to increase radio coverage.
TR O U B L E S H O O T I N G
JNSGyro-4T Problems
JNSGyro-4T Operator's Manual 6-5
Need help?
Do you have a question about the JNSGyro-4T and is the answer not in the manual?