Returning To Factory Default Setup - Intermec EasyCoder PF4i User Manual

Chapter 6—Setting Up the Printer

Returning to Factory Default Setup

Therearetwowaystoreturntothefactorydefaultsetupoftheprinter:
A InsertaspecialCompactFlashmemorycardandrestarttheprinter.
B Usingtheprinter'sbuilt-inkeyboard.
Toresettheprinterusingthekeyboard,dolikethis:
1 Lifttheprinthead.
2 Switchonthepowertotheprinterandpressthe<i/F5>keyandwait
untiltheprinterbeeps.
3 Swiftlypressthefollowingkeys:
</F4>
4 Thefollowingmessagewillbedisplayed:
Factory Default?
Enter=Yes ESC=No
5 Within10seconds,press<Enter>toresettheprintertofactory
default.Theparameterswillberesetandtheprinterwillcontinuethe
normalstartup.
Ifyoupress<Esc/F2>orwaituntilthe10secondstimeouthaspassed,
thenormalstartupwillcontinuewithoutanyresetbeingperformed.
Note:Ifanyofthefiles"card:NOSHELL.CFG",
rom:NOSHELL.CFG",or"c:NOSHELL.CFG"existsinthe
printer'smemory,noresettofactorydefaultwillbeperformed.
Thefactorydefaultwillremoveallfilesusedtostoresettings.
Itwillnotresetsettingsthatalreadyhasbeenreadwhenthe
filesareremoved.ThismeansthatEasyLANWirelesssettings
(SSID,keys,etc.)willretaintheirvaluesfromtheprevious
start.However,thenextrebootwillresetthemtofactory
default.
62